{
  "slug": "willow",
  "term": "Willow",
  "aliases": [
    "Willow SSD",
    "User-programmable SSD (Willow)"
  ],
  "definition": "Willow is a research SSD architecture that lets applications install storage-side programs to extend device operations under host-managed access permissions.",
  "note": "Programming: SSD Apps combine device-side code, a host library and, when needed, a kernel module. They can change storage semantics or offload control work; programmability is broader than bulk data processing. [slides]\n\nProtection: The host kernel is trusted. Hardware carries the originating process identity through RPCs; SPU-OS checks extent permissions on storage transfers and separates each app's local code and data. A missing permission entry can require a host round trip. [paper]\n\nPrototype: Eight FPGA-based storage processors use DDR2 DRAM to emulate PCM, with configured read/write latencies of 48/150 ns. These are modeled media timings, not end-to-end request latencies or NAND measurements. [paper]\n\nCompletion: Append's coordinator response gives a starting address and write count. Completion requires all APPENDDONE notifications; failed writes need reissue through Direct-IO. The filesystem still allocates physical space. An initial response alone is not a successful append. [paper]",
  "status": "research",
  "advantages": [],
  "limitations": [
    {
      "text": "The 1 GHz processor bar in Figure 5 is a projection; the prototype processor runs at 125 MHz.",
      "citationIds": [
        "paper"
      ]
    }
  ],
  "related": [
    "computational-storage",
    "iceclave"
  ],
  "supersedes": [],
  "supersededBy": [],
  "firstSeen": null,
  "lastSeen": null,
  "updated": "2026-11-17",
  "citations": [
    {
      "id": "paper",
      "title": "Seshadri et al. Willow: A User-Programmable SSD. OSDI 2014, pp. 67-80, sections 2.6, 3, 4.2 and 4.6.",
      "url": "https://files.usenix.org/s3fs-public/cdn/osdi14-paper-seshadri.pdf",
      "accessed": "2026-11-17"
    },
    {
      "id": "slides",
      "title": "Seshadri et al. Willow: A User-Programmable SSD. OSDI 2014 presentation, slides 5-11.",
      "url": "https://files.usenix.org/s3fs-public/conference/protected-files/osdi14_slides_seshadri.pdf",
      "accessed": "2026-11-17"
    },
    {
      "id": "proceedings",
      "title": "USENIX OSDI 2014 proceedings record: Willow, October 2014, pp. 67-80.",
      "url": "https://www.usenix.org/conference/osdi14/technical-sessions/presentation/seshadri",
      "accessed": "2026-11-17"
    }
  ],
  "provenance": [
    "Primary-source synthesis, not a hardware reproduction, security audit or current-device benchmark.",
    "The Append comparison uses modified Ext4, 1 kB appends and 64 MB preallocation; Base-IO uses O_DSYNC. [paper]"
  ]
}
