ficon · limited · also Fibre Connection, FC-SB

FICON

FICON (Fibre Connection) is the mainframe I/O channel protocol that runs as a Fibre Channel upper-level protocol (FC-SB), carrying channel programs to storage control units.

FICON replaced the ESCON serial channel while keeping the mainframe I/O model, in which the host starts a channel program that a control unit executes. As an FC-4 protocol it uses standard Fibre Channel framing and switched fabrics, which can also carry SCSI (FCP) traffic as a different upper-level protocol. [2] [3]

The FC-SB standards evolved from FC-SB-2 (2000, command mode) through FC-SB-3 (2007, persistent IU pacing), FC-SB-4 (2009, transport mode) and FC-SB-5 (2012, bidirectional transport mode) to FC-SB-6 (2016, extended-distance transport mode). Transport mode sends a whole channel program to the control unit in one descriptor. [3]

FICON targets the variable-record count-key-data architecture rather than fixed blocks, and a host can pass a long chain of mixed reads and writes in one invocation. [4]

Against ESCON's single half-duplex I/O connection at 17 MBps [5], early native FICON offered full-duplex 100 MBps links (200 MBps at 2 Gbps), multiple concurrent operations, up to 10 km on long-wavelength links and 16,384 device addresses per channel against 1,024. [2] A later mainframe channel generation runs 16 Gbps links with up to 2,600 MBps bidirectional. [6]

Relations

related
Fibre Channel, SAN, ESCON, Mainframe DASD, CKD DASD, Fixed block architecture, SCSI
supersedes
ESCON

Advantages

  • Bridge mode let a FICON channel reach ESCON-only control units through a bridge card in an ESCON director during migration. [2]

Limitations

  • Native mode allowed at most two cascaded FICON directors between channel and control unit. [2]
  • Hosts and control units must implement the FC-SB command architecture, so FCP storage targets cannot serve FICON channels. [4, 3]

Citations

  1. IBM Redbooks SG24-6266. FICON Native Implementation and Reference Guide. Second edition, October 2002, sections 1.3-1.4. (accessed 2026-10-16)
  2. Fibre Channel Industry Association. FICON 201. (accessed 2026-10-16)
  3. Fibre Channel Industry Association. FICON Webcast Q&A. (accessed 2026-10-16)
  4. IBM Documentation, z/OS basic skills: Enterprise System Connectivity (ESCON) channel. (accessed 2026-10-16)
  5. IBM Redpaper REDP-5134, Get More Out of Your IT Infrastructure With IBM z13 I/O Enhancements (accessed 2026-10-16)

Further reading

  1. FICON (accessed 2026-03-26)
Sources & caveats
  • The 2002 guide gives the concurrency limit as 'up to 16 or more' in one place and 'up to 32' in another, so no single number is stated.
  • Distance extensions by request (20 km at 1 Gbps, 12 km at 2 Gbps) listed in the 2002 guide are omitted from the text.
  • The 2,600 MBps figure is a maximum stated by IBM for one channel generation, not guaranteed application throughput.
  • The FC-SB timeline comes from the Fibre Channel Industry Association, an industry group.

JSON: /data/terms/ficon.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. FICON. Hesela. 2026-10-22. https://hesela.dev/terms/ficon/