Glass platter substrate
A glass platter substrate is a disk blank of chemically strengthened glass or glass-ceramic used instead of nickel-phosphorus-plated aluminium alloy.
Against plated aluminium alloy, a 1996 review lists a modulus of 75 to 85 GPa versus 72, hardness of 540 to 650 versus 500 kg/mm2, thermal expansion of 8.5 to 12.0 versus 24.2 x 10^-6 per degree C and usable temperatures of 500 degrees C or more versus 280. Thermal conductivity is only 0.75 to 2.0 W/mK against 80.0. Glass polishes to a fine finish, deforms less in processing and clamping, and withstands higher shock. [2]
Glass can chip at the edges, crack, or fail from microscopic flaws under thermal shock during sputtering or at high rotation speed. High heat emissivity can force lower deposition temperatures, hurting coercivity and signal-to-noise ratio, and cleaning leaves static charge that attracts particles. Glass-ceramics have several times the fracture strength and may need no texturing for contact start/stop. [2]
Heat-assisted recording media may be deposited at 700 degrees C or more, where glass viscosity falls steeply near the transformation point and the disk can creep into a concave or convex shape. Such flatness deviation disturbs read and servo signals and can reduce track density, so one patented approach selects substrates by the slope of their expansion curve and keeps flatness below 25 microns. [3]
Relations
Citations
- Thin-film media: Current and future technology
- US11270724B1: Glass substrates for heat assisted magnetic recording (HAMR) and methods and apparatus for use with the glass substrates
Further reading
Sources & caveats
- c2 is an IBM Research review (1996) in IBM's own journal; glass compositions have since changed.
- c3 is a patent (granted 2022) with a drive-maker assignee; it states the applicant's claims, not independent evidence.
- No cited source names current drive models with glass platters; the status field is carried over, not confirmed.
- Arithmetic: 24.2 / 8.5 = 2.8; 80.0 / 0.75 = 107.