mtbf · shipping

MTBF

Mean time between failures (MTBF) is the expected operating time between successive failures of a repairable system under specified conditions.

Under a constant repair rate model, MTBF is estimated as total operating time divided by the number of failures. The NIST example of 800 operating hours with 2 failures gives 400 hours, with a two-sided 90% confidence interval of 127 to 2251 hours. With no failures in the same 800 hours, only a 95% lower bound of 267 hours can be stated. [1]

For an exponential lifetime the mean time to failure is 1/λ, and the probability of failing by that time is 0.6321, so about 63% of units fail before reaching the mean. The mean is therefore not a calendar replacement age for an individual drive, and converting it into a failure probability requires a lifetime model. [2]

Schroeder and Gibson compared datasheet MTTF values of 1,000,000 to 1,500,000 hours, equivalent to annual failure rates of 0.58% to 0.88%, with replacement records for about 100,000 drives. Observed annual replacement rates ranged from 0.5% to 13.5% with a drive-weighted average of 3.01%, and replacement rates rose with age instead of staying constant. [4]

Relations

related
Annualized failure rate (AFR), Hard disk drive (HDD), S.M.A.R.T., Hazard rate, Annual replacement rate, Rate of occurrence of failures, Mean time to data loss (MTTDL)

Advantages

  • Gives one exposure-based figure that can be bounded with confidence limits from observed operating time and failure counts. [1]

Limitations

  • A drive datasheet usually states MTTF for a non-repairable item, so the quantity behind a quoted figure must be checked before comparing it with an MTBF. [4, 2]
  • Short tests with few failures leave wide intervals, so they cannot confirm a large value. [1]

Citations

  1. NIST e-Handbook: Constant repair rate model and confidence bounds (8.4.5.1) (accessed 2026-10-22)
  2. NIST e-Handbook: Exponential distribution (8.1.6.1) (accessed 2026-10-22)
  3. Bianca Schroeder and Garth A. Gibson. Disk failures in the real world: What does an MTTF of 1,000,000 hours mean to you? FAST 2007. (accessed 2026-10-22)

Further reading

  1. Hesela: AFR is a rate, not a one-year failure probability (accessed 2026-10-10)
Sources & caveats
  • nist-intervals is the NIST/SEMATECH e-Handbook section 8.4.5.1, re-read on 2026-10-22 including its worked example.
  • The 800-hour, 2-failure, 400-hour, 127 to 2251 hour and 267-hour figures come from nist-intervals.
  • nist-exponential is the NIST/SEMATECH e-Handbook section 8.1.6.1, re-read on 2026-10-22, and is the source of 0.6321.
  • sg07 is the FAST 2007 paper by Schroeder and Gibson of Carnegie Mellon University, read in full on 2026-10-22.
  • The 1,000,000 to 1,500,000 hours, 0.58% to 0.88%, about 100,000 drives, 0.5% to 13.5% and 3.01% figures come from sg07.

JSON: /data/terms/mtbf.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. MTBF. Hesela. 2026-10-22. https://hesela.dev/terms/mtbf/