PCIe 5.0 storage
PCIe 5.0 is the fifth PCI Express generation, running each lane at 32.0 GT/s with 128b/130b encoding, twice the per-lane rate of PCIe 4.0.
The standards body's speeds-and-feeds table lists PCIe 5.0 at 32.0 Gb/s per lane and 504 Gb/s per direction for x16 after encoding, in 2019, against 252 Gb/s for 4.0 and 126 Gb/s for 3.0. [2] Base Specification Revision 5.0, version 1.0, was released on 28 May 2019. [4]
PCIe 5.0 is compatible with earlier generations from software to clocking to mechanics, so 1.x to 4.x cards run in 5.0 slots at the highest common rate, and the reverse. [3] The Linux kernel computes the usable lane rate at 32 GT/s as 32,000 x 128/130 Mb/s. [5]
That is about 31.5 Gb/s or 3.94 GB/s per lane per direction, about 15.75 GB/s for a x4 SSD link and 63 GB/s for x16. These are link ceilings after line encoding, which protocol overhead and drive limits reduce.
Relations
Advantages
- A x8 gen 5 link matches a x16 gen 4 link, freeing lanes for more devices. [2]
Limitations
- The next generation doubles the rate to 64.0 Gb/s with PAM4 signalling and flits, so gen 5 hardware is one step in a continuing sequence. [2]
Citations
- PCI-SIG. PCI Express specification webinar, speeds and feeds table, rev 6.
- PCI-SIG FAQ. Are PCIe 5.0 products compatible with products built to prior PCIe generations?
- PCI-SIG specifications listing, archived 2 July 2019: PCI Express Base Specification Revision 5.0, version 1.0.
- Linux kernel source: drivers/pci/pci.h, PCIE_SPEED2MBS_ENC.
Further reading
Sources & caveats
- The speeds table comes from a webinar presentation; the specification text was not read.
- The release date comes from an archived copy of the specifications page dated July 2019; the release press page could not be fetched.
- No measured SSD results are given, and signal-integrity effort at 32 GT/s is not quantified.
- Arithmetic: 32,000 x 128 / 130 = 31,508 Mb/s per lane; x4 gives 15.75 GB/s and x16 63 GB/s, consistent with 504 Gb/s.