virtio-scsi · shipping · also virtio-scsi

Virtio SCSI host (virtio-scsi)

Virtio-scsi is a paravirtualized SCSI host interface that carries commands to logical units addressed through targets and LUNs.

Interface: Unlike one-disk virtio-blk, a virtio-scsi controller can expose multiple devices. QEMU can serve an image through scsi-hd; this is not necessarily physical SCSI passthrough. [2]

Completion: VIRTIO_SCSI_S_OK means a SCSI status was supplied, not necessarily GOOD status. Inspect SCSI status, sense data and residual length as applicable. [1]

Storage: The guest interface does not specify QCOW2 or remove an image's dependencies. [3]

Relations

related
Virtio block device (virtio-blk), SCSI, Logical unit number (LUN), Command descriptor block (CDB), QCOW2

Citations

  1. OASIS VIRTIO 1.2 CS01 (1 July 2022): sections 5.2 and 5.6 (accessed 2026-11-17)
  2. QEMU: Configuring virtio-blk and virtio-scsi Devices (19 January 2021) (accessed 2026-11-17)
  3. QEMU: An Overview of QEMU Storage Features (14 September 2020) (accessed 2026-11-17)

Further reading

  1. Hesela: virtual interfaces and QCOW2 recovery boundaries (accessed 2026-11-17)
Sources & caveats
  • Documentation synthesis, not a VM benchmark, conformance test or power-loss experiment.
  • VIRTIO 1.2 CS01 is the reviewed baseline, not a claim that it is the latest edition.

JSON: /data/terms/virtio-scsi.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. Virtio SCSI host (virtio-scsi). Hesela. 2026-11-17. https://hesela.dev/terms/virtio-scsi/