acceleration-factor · also Life-test acceleration factor

Acceleration factor

An acceleration factor is a model-specific multiplier relating corresponding failure times at two stress conditions for the same failure mechanism.

Related Observatory article: Read on hesela.com

Convention: For constant time scaling, AF = t_use / t_stress and F_use(t) = F_stress(t / AF), where F is cumulative failure probability. AF is dimensionless when both times use the same unit. AF multiplies time, not failure probability. [1]

Scope: Different failure mechanisms generally require different factors. Under this constant-scaling model, Weibull shape and lognormal dispersion remain unchanged between stress conditions. Approximate parallelism in probability plots is a model check, not proof of physical validity. [1] [3]

Temperature: An Arrhenius model gives AF = exp[(Ea/k) x (1/T_use - 1/T_stress)]. Temperatures are in kelvin, k is Boltzmann's constant in eV/K, and Ea is in eV. Activation energy must match the mechanism and materials. A value borrowed from a different NAND population does not establish its retention lifetime. [2] [4]

Relations

related
Accelerated life testing, Flash data retention, Weibull distribution

Citations

  1. NIST e-Handbook 8.1.4: Physical acceleration and time-scaling relationships (accessed 2026-11-18)
  2. NIST e-Handbook 8.1.5.1: Arrhenius acceleration (accessed 2026-11-18)
  3. NIST e-Handbook 8.2.1: Choosing a life distribution model (accessed 2026-11-18)
  4. Hesela: 3D NAND retention, thermal time conversion and evidence limits (accessed 2026-11-18)
Sources & caveats
  • Literature synthesis and model identities, not measured device lifetimes or a qualification of any SSD.

JSON: /data/terms/acceleration-factor.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. Acceleration factor. Hesela. 2026-11-18. https://hesela.dev/terms/acceleration-factor/