accelerated-life-testing · also ALT

Accelerated life testing

Accelerated life testing observes failures under elevated stresses to model time to failure at specified use conditions.

Related Observatory article: Read on hesela.com

Planning: Samples are assigned to stress combinations and observed for failures and test-end censoring. Both an acceleration model and a lifetime distribution are needed for extrapolation. Excessive stress can introduce mechanisms absent during intended use, invalidating that transfer. [1]

Interpretation: A Weibull or lognormal model may fit limited observations similarly while predicting very different behavior outside the measured range. Agreement with test data alone does not establish the use-condition projection. [2]

Storage scope: A retention endpoint is not automatically a whole-drive failure endpoint. Keep the wear history, sensing method and error criterion attached to an accelerated NAND result. [3]

Relations

related
Acceleration factor, Flash data retention, Optical-disc lifetime estimate

Citations

  1. NIST e-Handbook 8.3.1.4: Accelerated life tests (accessed 2026-11-18)
  2. NIST e-Handbook 8.2.1: Choosing a life distribution model (accessed 2026-11-18)
  3. Hesela: 3D NAND retention, thermal time conversion and evidence limits (accessed 2026-11-18)
Sources & caveats
  • Literature synthesis and model identities, not measured device lifetimes or a qualification of any SSD.

JSON: /data/terms/accelerated-life-testing.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. Accelerated life testing. Hesela. 2026-11-18. https://hesela.dev/terms/accelerated-life-testing/