bit-patterned-media · research · also BPM, BPMR

Bit-patterned media

Bit-patterned media is a magnetic recording medium that stores individual bits on lithographically defined, separated magnetic islands.

Each island replaces the group of grains used for one bit in conventional granular media. Signal quality then depends on island placement and addressability rather than simply grain count [2]. Thermal stability still matters: a value near 60 for the energy-barrier ratio is not a universal retention threshold [5].

A 2015 demonstration reported 1.6 Td/in2 patterned media, corresponding to roughly 1.3 Tb/in2 after recording overhead, and a raw error rate below 1e-2 [2]. A companion demonstration used shingled recording and two-dimensional decoding with a reader larger than the bit spacing [3]. Island density, raw detector error rate and decoded user-data reliability are different quantities.

Patterning trades random grain-boundary noise for fabrication tolerances, switching-field variation and write-clock alignment. Thermal decay can also be accelerated by adjacent-track write fields and dipolar interactions [2]. A successful density demonstration therefore does not establish a retention guarantee for a complete drive.

Relations

related
Heat-assisted magnetic recording (HAMR), Perpendicular magnetic recording (PMR), Areal density, Superparamagnetic limit, Shingled magnetic recording (SMR), Magnetic thermal stability factor

Advantages

  • A larger magnetic island per bit can improve stability compared with the smaller grains needed in conventional granular recording. [2]

Limitations

  • Missing or merged islands can produce defects that must be included in the recording error budget. [3]
  • Write synchronization must register current transitions to prepatterned bit positions. [2]
  • Head skew, servo tracking and pattern manufacture complicate integration into a rotating disk. [2]

Citations

  1. Albrecht et al., Bit Patterned Magnetic Recording: Theory, Media Fabrication, and Recording Performance (2015), arXiv:1503.06664 (accessed 2026-10-17)
  2. Obukhov et al., Two-dimensional Decoding Algorithms and Recording Techniques for Bit Patterned Media Feasibility Demonstrations (2015) (accessed 2026-10-17)
  3. Monte Carlo simulation of bit patterned media applied to data storage devices (MSc thesis, Universidad Nacional de Colombia, 2016) (accessed 2026-10-16)
  4. Weller and Moser, Thermal effect limits in ultrahigh-density magnetic recording (1999), doi:10.1109/20.809134 (accessed 2026-10-17)

Further reading

  1. Bit-patterned media (accessed 2026-03-26)
Sources & caveats
  • The 2015 recording papers [c2, c3] come from the same HGST research group. Their results are laboratory demonstrations, not independent fleet evidence or proof of shipping availability.
  • The 1999 institutional abstract [5] was reviewed for its qualified stability-threshold statement; no full-paper reproduction is claimed.
  • The previously cited thesis [4] is retained as further reading; the rewritten technical description relies on the primary recording papers.
  • Reviewed [2] sections I and II, including II.B.2 thermal stability; [3] abstract and experimental setup. No third-party figures or experimental data are reproduced.

JSON: /data/terms/bit-patterned-media.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. Bit-patterned media. Hesela. 2026-10-17. https://hesela.dev/terms/bit-patterned-media/