DAT cartridge
A DAT cartridge is a 3.81 mm magnetic tape cassette recorded by helical scan in the DDS format, standardised by ECMA from 1990 and reaching 12 GB native on 125 m tape in DDS-3.
ECMA-170 (1992) specifies the cartridge with 60 m and 90 m tapes, Type A of 13 µm thickness and up to 60.5 m, Type B of 9 µm and up to 92.0 m. The family began with ECMA-139 (1990, ISO/IEC 10777) and continued with Data/DAT, DDS-DC and Data/DAT-DC, helical scan with new tape types allowing over 1 GB of user data. [2]
DDS-3 (ECMA-236, 1996) on 125 m tape doubles linear density and uses more of each track for data, giving three times the DDS-2 capacity for a given length, 12 GB uncompressed or typically 24 to 36 GB compressed, a 2:1 to 3:1 ratio. Average track pitch is 9.053 µm and maximum density 5,999.7 flux transitions per millimetre, a bit cell of 0.1666 µm. [3]
Each recorded cartridge carries one format, marked by recognition holes on the case, and a DDS-3 drive is not required to handle earlier formats. [3]
Linux drives DAT through the generic SCSI tape driver, usually in variable-block mode with fairly large blocks for acceptable SCSI transfer rates, and on DDS drives the first partition set by the partition command is physically first. [4] [5] The DDS-3 ISO standard was confirmed in 2020. [6]
Relations
- related
- Magnetic tape storage, Helical scan recording, DLT, SCSI
Advantages
- Drive-side compression on DAT drives is supported through the same generic driver. [4]
Citations
- ECMA-170, 1st edition, June 1992. 3,81 mm Wide Magnetic Tape Cartridge, Helical Scan Recording, DDS Format Using 60 m and 90 m Tapes.
- ECMA-236, 1st edition, June 1996. 3,81 mm Wide Magnetic Tape Cartridge, Helical Scan Recording, DDS-3 Format Using 125 m Tapes.
- Linux man-pages: st(4), SCSI tape device.
- Linux kernel documentation: The SCSI Tape Driver.
- ISO/IEC 15521:1998. DDS-3 format using 125 m length tapes, ISO catalogue page.
Further reading
Sources & caveats
- The sources give no transfer rates, error rates, media life or end-of-production date, so the eol status rests on no production notice.
- Arithmetic: 24 / 12 = 2 and 36 / 12 = 3.