Disk shelf
A disk shelf is an enclosure that houses storage drives and provides shared power, cooling and connectivity to a host or storage controller.
A shelf can house NVMe SSDs with Ethernet-connected shelf modules; the cited NVMe shelf requires RoCE-capable storage ports for the covered systems. SAS attachment and SES management are properties of a design, not consequences of the term disk shelf. [6] [7]
One open hardware specification (version 0.5, a draft) builds a JBOD from two identical 1U trays of 15 3.5-inch drives, 30 drives in 2U. Each tray has a drive plane board, two SAS expander boards, a fan control board and six redundant fan modules. [2]
Each tray connects to servers over x4 SAS 6G links, 24 Gbit/s raw per link, and trays cascade through extra mini-SAS ports. Expander boards, trays, drives and fans can be serviced without taking other trays down. Power is 12 V from rack bus bars, and the operating range is 5 to 35 °C with drives, 10 to 90% non-condensing humidity and 1,000 m altitude. [2]
In this design, management is in-band through SCSI Enclosure Services, which covers the enclosure's mechanical and electrical environment, indicators and controls. The design uses a standalone SES model polled by host software and supports diagnostic pages 00h, 01h, 02h, 04h, 05h, 07h, 0Ah and 0Eh. [2] SES-4 is INCITS 555-2021. [3]
Linux v6.12 provides one implementation example: its SES driver binds to enclosure-type devices (0x0d) and separates status reads from control writes. These are version-specific driver behaviors, not a complete definition of SES support. [4] [5]
Relations
- related
- JBOD, SAS expander, Nearline HDD, Serial Attached SCSI (SAS), SCSI, NVMe, NVMe backplane, SCSI Enclosure Services
Citations
- Open Compute Project. Open Vault Storage Hardware v0.5 specification, draft.
- T10 Working Drafts index.
- Linux v6.12 source: drivers/scsi/ses.c.
- Linux v6.12 source: include/scsi/scsi_proto.h.
- NetApp disk shelves and storage media: NS224 and DS224C specifications
- NetApp NS224: preparation for end-of-availability systems, RoCE-capable storage ports
Further reading
Sources & caveats
- The detailed design is one contributor's draft (Open Vault v0.5, contributed to the Open Compute Project by Facebook), so its figures describe that design, not disk shelves in general.
- Open Vault specifies SAS and SES for its design; transport and management requirements of other shelves must be checked in their own documentation.
- Kernel references are pinned to Linux v6.12. The former timeout/retry summary was removed because retry conditions are implementation-specific.
- Arithmetic: 30 drives / 2U = 15 per rack unit; 4 x 6 Gbit/s = 24 Gbit/s before encoding overhead.
- NetApp examples establish that shelves are not universally SAS-connected. No throughput, compatibility across vendors or measured availability benefit is inferred.
- The NetApp examples are NS224 (NVMe media, Ethernet NSM modules) and DS224C (SAS IOM12 modules). The cited port-preparation guide covers end-of-availability systems.