dual-port · shipping

Dual-port drive

A dual-port drive exposes two independent ports to the same media, as two SAS ports with separate addresses or NVMe controllers on separate ports, so a host keeps a second path.

In the SAS port model a port is one or more phys, each phy belongs to one port, and each port has its own SAS address. A narrow port has one phy and a wide port typically four, and a SAS disk might have two narrow ports, a dual-port capability parallel SCSI lacked. [4]

NVMe multi-path I/O means two or more independent paths between one host and a namespace and needs a subsystem with two or more controllers, while namespace sharing lets several hosts reach one namespace through different controllers. Identify Controller reports Multiple Ports in CMIC bit 0 and Multiple Controllers in bit 1, and the two PCIe ports may attach to the same or different Root Complexes. [2]

2.5-inch 15 mm devices are listed with dual-port support in NVMe x4 and 12 Gb/s SAS variants up to 30.72 TB, while the 7 mm variants do not mention it. [3]

Relations

related
Serial Attached SCSI (SAS), Fibre Channel, Multipath I/O, ALUA, NVMe base specification, U.2

Advantages

  • With ports on different Root Complexes, the two paths need not share one host-side component. [2]

Limitations

  • Coordination between hosts accessing a shared namespace lies outside the NVMe specification. [2]
  • Both ports reach the same media, so a dual-port drive covers path failure, not its own failure. [2, 4]

Citations

  1. NVM Express Base Specification, Revision 2.4, 31 July 2026, section 2.4.1 and Identify Controller CMIC field. (accessed 2026-10-16)
  2. SNIA. SSD Form Factors resource guide, updated December 2024. (accessed 2026-10-16)
  3. Oracle. Introduction to Serial Attached SCSI, appendix G of an HBA installation guide. (accessed 2026-10-16)

Further reading

  1. Dual-port drive (accessed 2026-03-26)
Sources & caveats
  • The SAS description comes from an Oracle HBA installation guide, not the T10 standard; the T10 SAS Protocol Layer draft link returned an HTML page and was not read.
  • No source states failover time, performance gain or availability for dual-port drives.
  • That dual porting does not cover drive failure is an inference from the port models.

JSON: /data/terms/dual-port.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. Dual-port drive. Hesela. 2026-10-22. https://hesela.dev/terms/dual-port/