U.2
U.2 identifies PCIe SSDs and connections compliant with the PCI Express SFF-8639 Module specification, commonly implemented in a 2.5-inch drive enclosure.
The enclosure, electrical link and storage interface are separate layers. A 2.5-inch enclosure does not identify the protocol, and NVMe does not specify this connector. U.2 compliance is distinct from generic 2.5-inch SAS or SATA SSD packaging. [2]
U.2 and U.3 share the SFF-8639 connector family but are not interchangeable labels. U.3 changes the lane arrangement and detection mechanism; its separate definition explains the directional compatibility requirement. [3]
Hot-plug requires support in the platform, operating system, SSD and driver. Host survival and preservation of acknowledged writes are separate qualification criteria. Follow the system's documented removal procedure and qualification requirements rather than treating the drive label as permission for surprise removal. [4]
SFF-8639 has 68 contacts, the 29 of a dual-port SAS connector plus 39 more for four PCIe lanes and sideband signals, so single-port SATA, SAS, MultiLink SAS or up to four PCIe lanes mate with one receptacle. Hot-plug contacts engage in three levels offset by 0.50 mm. [5] In the universal x4 bay the slot learns the device type from presence and interface-detect signals, earlier PCIe devices get no link, and a dual-port device swaps lanes 1 and 2. [3]
Relations
- related
- NVMe, Enterprise SSD, EDSFF, PCIe lanes (storage), Flash module, U.3, SATA Express, Dual-port drive
Limitations
- Contacts are rated 1.5 A continuous per power pin and 500 mA per signal pin, and the connector specification does not cover device power budgets, thermal limits or protocols. [5]
Citations
- SNIA SSD Form Factors: 2.5-inch (U.2)
- SNIA SFF-TA-1001 Rev 1.1: Universal x4 Link Definition for SFF-8639, sections 1 and 2.4
- Intel: Hot-Plug Capability of NVMe SSDs in Server Platforms (2016)
- SNIA SFF-8639: Multifunction 6X Unshielded Connector, Rev 2.2, 6 May 2024.
Further reading
Sources & caveats
- The stable u2 identifier and legacy aliases are retained; U.3 now has a distinct record because its link definition differs. [2] [3]
- Primary sources support the definition and notes; c1 is retained as a legacy reference, not as the basis for compatibility claims.
- The hot-plug source covers specified Intel SSD families and platforms in 2016; its product guarantees are not generalized. [4]
- The connector and bay documents come from one industry group, so there is no vendor-independent source for the specification itself.
- The names U.2 and U.3 do not appear in SFF-8639 or SFF-TA-1001; their mapping to these specifications follows common usage.
- Arithmetic: 29 + 39 = 68 contacts, and 39 = 14 + 25 additional signals.