Metal particle tape
Metal particle (MP) tape is magnetic tape whose recording layer holds metal particles in a binder, required by the first LTO format and replaced by barium ferrite from LTO-6.
ECMA-319 (2001), the Ultrium-1 format for 12.65 mm, 384-track cartridges, requires a magnetic coating of metal particles. Its four cartridge types are 609.0, 319.0, 203.0 and 87.0 m long with nominal 100, 50, 30 and 10 Gbytes, on tape of 8.9 µm average thickness. [2]
An LTO-10 cartridge shipping from 2025 holds 30 TB uncompressed on 1,035 m of 5.2 µm tape with 15,104 tracks and 21.7 kbit/mm, and enterprise LTO-10 media reaches 1,337 m at 4.0 µm. Against Ultrium-1 that is about 1.7 times the length, 58% of the thickness and 39 times the tracks, gains from media, heads and servo together. [3]
Barium ferrite came into use from LTO-6 because it keeps its data-holding ability at small particle sizes and, as a chemically stable oxide, suits long-term storage better than metal magnetic material. Strontium ferrite is used in the latest products. [3]
Relations
Advantages
- ECMA-319 specifies tape, cartridge, recorded-signal quality and recorded format for interchange between drives. [2]
Citations
- ECMA-319, 1st edition, June 2001. Data interchange on 12,7 mm 384-track magnetic tape cartridges, Ultrium-1 format.
- JEITA Tape Storage Technical Committee. Tape Storage Trends 2026 (テープストレージ動向 2026版), Revision 2.0.
Further reading
Sources & caveats
- Later-generation figures come from the JEITA Tape Storage Technical Committee's 2026 slide deck in Japanese, read in its capacity, thickness and materials slides.
- Neither source gives metal-particle coercivity, particle size or areal density, or attributes capacity growth to the coating alone.
- ECMA-319 says nothing about later generations or the end of metal-particle use.
- Arithmetic: 1,035 / 609 = 1.7; 5.2 / 8.9 = 0.58; 15,104 / 384 = 39.