mlc-ssd · also multi-level cell SSD, 2-bit-per-cell SSD

MLC SSD

An MLC SSD uses NAND flash that, in the two-bit sense of MLC, encodes two bits per cell using four threshold-voltage states.

Encoding: Four states are not four sensing boundaries; two-bit MLC distinguishes four stored states. MLC is also used broadly for multi-bit NAND, so a product label needs its bits-per-cell qualifier. [4]

Reliability: A lower raw bit error rate does not by itself imply fewer whole-drive replacements or uncorrectable errors. A production study found no general SLC advantage over MLC for those outcomes within its observed population. [3]

Relations

related
Multi-level cell (MLC), Triple-level cell (TLC), SLC SSD, TLC SSD, Program/erase cycle, Raw bit error rate, NAND flash

Citations

  1. Schroeder, Lagisetty and Merchant - Flash Reliability in Production, FAST 2016, Sections 2 and 7 (accessed 2026-10-16)
  2. KIOXIA - Multi-level cell technology: bits and threshold-voltage states (accessed 2026-10-16)

Further reading

  1. MLC SSD (accessed 2026-03-26)
  2. Michael Cornwell, Anatomy of a Solid-State Drive (accessed 2026-10-16)
Sources & caveats
  • Schroeder et al., FAST 2016, Sections 2 and 7: ten custom Google drive models, six years of monitoring; exact fleet size was not disclosed. [3]
  • Its MLC models used 43-50 nm flash. The findings do not rank current TLC/QLC products or establish a class-wide MLC end-of-life date. [3]
  • Capacity multiplied by a chip P/E limit is not a measured host-write rating; use the exact SSD's qualification.

JSON: /data/terms/mlc-ssd.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. MLC SSD. Hesela. 2026-10-17. https://hesela.dev/terms/mlc-ssd/