nand-flash · shipping · also NAND

NAND flash

A non-volatile flash memory architecture with cells connected in series strings and data accessed through page-read, page-program and block-erase operations.

Related Observatory article: Read on hesela.com

A page read transfers array data into an internal register before data moves over the interface; programming uses a page, while erase acts on a block containing multiple pages. These are chip operations, not the logical-sector interface exposed by an SSD. Page and erase-block dimensions and programming-order rules depend on the device. [2] [5]

The cell arrangement is distinct from the external interface. Serial NAND can use a NOR-like serial interface without becoming NOR. NAND requires error correction, bad-block handling and wear management. A managed device supplies a controller for these duties; on-die ECC alone does not make it fully managed, and bad-block handling and wear leveling may still belong to the host. [1] [3]

For raw NAND, preserve factory bad-block information, meet the specified ECC requirement, and check program/erase status. After a failed operation, follow the part's recovery and retirement rules; retiring a block cannot reconstruct unreadable data. Successful programming alone does not establish long-term retention. [4] [5]

The page's spare area stores ECC and other metadata, not replacement erase blocks. Available metadata space depends on the coding and layout; Desnoyers describes how stronger ECC can constrain FTL metadata there. [5]

Charge can only be added in program-and-verify steps, so a page cannot change in place; n bits per cell need 2^n - 1 read reference voltages, three for MLC and seven for TLC. [7]

Relations

related
NOR flash, Single-level cell (SLC), Multi-level cell (MLC), Triple-level cell (TLC), Quad-level cell (QLC), Solid-state drive (SSD), Flash translation layer (FTL), Bad block management, All-flash array, SD Express, Byte-addressable storage, NAND channel, Planar NAND, NAND die stacking, NAND page, NAND erase block, Error-correcting code, Wear leveling, Execute-in-place, NAND spare area, NAND target, NAND logical unit, NAND plane, Unsorted Block Images (UBI), UBI File System (UBIFS), Memory Technology Device (MTD), NAND wordline, Program/erase cycle, Flash-Cosmos

Advantages

  • Several bits per cell come from dividing the threshold-voltage window into 4 or 8 states, with a Gray-style mapping in which adjacent states differ by one bit. [7]

Limitations

  • Endurance and retention depend on operating conditions and error correction, not only on the number of bits per cell. [5]
  • Rewriting one 4 KB block in place inside a 128 KB erase unit would copy, erase and rewrite 128 KB, 32 times the write size, so writes are remapped to new locations. [6]
  • Endurance fell from about 10,000 cycles for 5x-nm MLC to about 3,000 for 1x-nm MLC and 1,000 for 1x-nm TLC. [7]

Citations

  1. KIOXIA. Why Replace Embedded NOR Flash Memory with Serial NAND? March 2021, revision 3.1, pages 1-2. Cell arrangements and external interfaces. (accessed 2026-10-18)
  2. Agrawal et al. Design Tradeoffs for SSD Performance. USENIX ATC 2008, sections 2 and 2.1. Page reads, page programming and block erasure. (accessed 2026-10-18)
  3. Micron. Choosing the right NAND. Raw NAND, serial NAND, managed NAND and on-die ECC NAND. (accessed 2026-10-18)
  4. Micron. FAQs, NAND flash section. ECC requirements, manufacturer-marked bad blocks and program/erase status handling. (accessed 2026-10-18)
  5. Desnoyers. What Systems Researchers Need to Know about NAND Flash. HotStorage 2013, sections 2-3: geometry, endurance, retention and page spare areas. (accessed 2026-10-18)
  6. Gal and Toledo. Algorithms and Data Structures for Flash Memories. Tel-Aviv University survey, 24 July 2004. (accessed 2026-10-16)
  7. Cai, Ghose, Haratsch, Luo and Mutlu. Errors in Flash-Memory-Based Solid-State Drives: Analysis, Mitigation, and Recovery. arXiv 1711.11427v2, 2018. (accessed 2026-10-16)
Sources & caveats
  • The 2004 survey and the planar-era review figures are historical and cited from other works; the review has one drive-maker co-author.
  • Arithmetic: 128 / 4 = 32; 1 + 2 = 3 and 1 + 2 + 4 = 7 read reference voltages.

JSON: /data/terms/nand-flash.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. NAND flash. Hesela. 2026-11-18. https://hesela.dev/terms/nand-flash/