nvdimm-n · limited

NVDIMM-N

NVDIMM-N is a DIMM that works as DRAM and, on power loss, copies its contents to on-module flash using stored energy, restoring them at the next boot.

Related Observatory article: Read on hesela.com

NVDIMM-N exposes DRAM to the host; flash holds its backup image, not additional host-addressable capacity. Backup power may come from a separate module or the host. [5] An on-module supercapacitor is not a defining requirement: one server design uses a centralized battery. [6]

In SNIA's ADR example, health checks and stored energy permit arming. On power loss the platform drains protected buffers and puts the DIMMs in self-refresh before DRAM is isolated and saved to flash. Firmware restores it on power-up. [5]

The cited server guide reports save times of about one minute for its listed rack and tower models, versus 140 seconds for MX740c and MX840c. With a missing or insufficiently charged battery, it can restore data but keep the module read-only. Lack of readiness for another save does not itself prove that restored data was lost. [6]

Linux can expose the address range as a PMEM block device. [2] CPU caches may need flushing and draining; a completed store is not a transaction commit. [7] A Block Translation Table (BTT) supplies atomic sector updates using indirection and reserved metadata. [8] The ndctl sector mode disables DAX: BTT sector access and DAX are alternative configurations for the same namespace. [9]

Linux NFIT per-module flags include save_fail, restore_fail, flush_fail, not_armed, smart_event, map_fail and smart_notify; they describe different conditions. [3]

Relations

related
Persistent memory, Storage-class memory (SCM), Byte-addressable storage, Direct Access, Power loss protection, Non-volatile random-access memory, Persistence domain

Limitations

  • Protection for new writes requires a ready backup path; successful restoration into read-only mode is distinct from readiness for the next save. [5, 6]

Citations

  1. LIBNVDIMM: Non-Volatile Devices, Linux kernel documentation (accessed 2026-10-30)
  2. Documentation/ABI/testing/sysfs-bus-nfit, Linux kernel (accessed 2026-11-03)
  3. NVDIMM-N Cookbook: A Soup-to-Nuts Primer on Using NVDIMM-Ns to Improve Your Storage Performance (accessed 2026-10-30)
  4. Dell EMC NVDIMM-N Persistent Memory User Guide: Battery; implementation-specific power, save time and read-only restore behavior. (accessed 2026-10-30)
  5. PMDK libpmem: pmem_persist, pmem_flush, pmem_drain and pmem_has_auto_flush; persistence is not transactional. (accessed 2026-10-30)
  6. Linux kernel documentation. BTT - Block Translation Table, introduction and theory of operation. (accessed 2026-10-30)
  7. ndctl-create-namespace(1): sector, fsdax and devdax modes; BTT disables DAX. (accessed 2026-10-30)

Further reading

  1. NVDIMM-N (accessed 2026-03-26)
  2. Revamping Storage Class Memory With Hardware Automated Memory-Over-Storage Solution (accessed 2026-10-16)
Sources & caveats
  • c4 is a 2021 arXiv preprint on another subject, retained as historical secondary background, not as a current NVDIMM-N capacity or energy-density limit.
  • c5 is a 2016 SNIA tutorial by module-maker authors; slides 7-16 describe host access, save/restore, ADR and backup-power arrangements.
  • dell-battery is product documentation, not a Hesela measurement; its timing and read-only behavior apply to the named implementations.
  • c2, c3 and btt document Linux interfaces. A flag name alone is not a universal diagnosis of which bytes were lost.
  • pmem-persist and ndctl-mode distinguish persistence completion, sector atomicity and DAX; no NVDIMM hardware experiment or current market survey was performed.

JSON: /data/terms/nvdimm-n.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. NVDIMM-N. Hesela. 2026-11-03. https://hesela.dev/terms/nvdimm-n/