power-loss-protection · shipping · also PLP

Power loss protection

Power-loss protection is a set of hardware and firmware measures intended to preserve specified storage-device data and internal state when external power is unexpectedly removed.

Related Observatory article: Read on hesela.com

The protection boundary is product-specific. A historical SSD white paper distinguishes protection of data already stored in NAND from protection that also commits in-flight or volatile buffered writes and mapping information. A capacitor bank or an enterprise label alone does not specify which promise applies. FAST 2013 observed failures on some PLP-labelled devices but did not isolate a failed capacitor; this is not a field failure rate or evidence about every current product. Consult the exact model and firmware documentation. [1] [2]

The concept is not SSD-exclusive: An HDD implementation uses a mechanism using spindle energy and flash for buffered-write protection on supported ArmorCache models. This does not establish a guarantee for every HDD. [3]

OCP Datacenter NVMe SSD Specification 2.6 requires PLP checks before writes at power-on and periodically (PLP-3). During checking, enough energy must remain for power loss (PLP-4). PLP-6 measures capacitor energy margin, beyond detecting open/short faults. These requirements describe compliant devices, not all SSDs; a health reading is not a remaining-lifetime prediction. [4]

Power-cut qualification also depends on the test pattern. Repeated identifying headers can expose mixtures that constant padding may conceal. The fixed XOR mask in FAST 2013 preserves recoverable structure while reducing repetition; it is not authenticated encryption. [2]

Relations

related
Enterprise SSD, Solid-state drive (SSD), Torn write, Flash translation layer (FTL), Force Unit Access, Unserializable write, SSD controller, ArmorCache, NAND page pairing, All-flash array, Flash-backed write cache, NVMe volatile write cache

Limitations

  • Data-at-rest protection does not by itself promise persistence of volatile host-write buffers. [1]

Citations

  1. Micron: How Micron SSDs Handle Unexpected Power Loss, client and enterprise countermeasures (2014) (accessed 2026-10-13)
  2. Zheng et al.: Understanding the Robustness of SSDs under Power Fault, FAST 2013, sections 3.1-3.1.1. (accessed 2026-11-06)
  3. Western Digital. ArmorCache Write Cache Data Protection, mechanism and WCE/WCD scope, printed pp. 1-2. (accessed 2026-10-16)
  4. Open Compute Project: Datacenter NVMe SSD Specification 2.6 (25 September 2024), section 7.8, PLP-3, PLP-4 and PLP-6, printed page 158. (accessed 2026-10-19)

Further reading

  1. Hesela: SSD power-loss protection, evidence and qualification boundaries (accessed 2026-11-06)

JSON: /data/terms/power-loss-protection.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. Power loss protection. Hesela. 2026-11-11. https://hesela.dev/terms/power-loss-protection/