robotic-tape · shipping · also tape picker, medium transport element

Robotic tape loader

A robotic tape loader is the picker of a tape library, the medium transport element in SCSI terms, which moves cartridges between slots, import/export slots and drives.

The SCSI-2 medium-changer model treats a library as elements with unique 16-bit addresses, each of four types, namely medium transport, storage, import/export and data transfer. The host moves a cartridge with MOVE MEDIUM or EXCHANGE MEDIUM from a source to a destination element, and address zero lets the changer choose a default transport element. [2]

The changer does not control the drive, so the host sends changer commands such as READ ELEMENT STATUS and, separately, drive commands such as LOAD UNLOAD, READ and WRITE. [2] [3]

The robot is only part of a mount. A 2001 test of an LTO Ultrium library measured 25 to 30 s mounts including drive loading and 27 to 32 s unmounts, with 8,980 mounts and 8,978 dismounts in three days without failure. [4] A 1994 study measured 52.15 s on average, about 28 s for a single session, and found that the robot waits where it last serviced a cartridge, in front of the drive after a mount or the cell after a release. [5]

Relations

related
Tape library, LTO (Linear Tape-Open), Magnetic tape storage, SCSI

Advantages

  • Large libraries can use several independent robotics subsystems, each with its own contiguous range of transport element addresses. [2]

Limitations

  • In a multi-silo library, drive assignment that ignores the volume's silo can at least double mount and dismount times through pass-throughs. [5]

Citations

  1. SCSI-2 draft standard, clause 17: Medium-Changer Devices. (accessed 2026-10-16)
  2. Linux kernel documentation: SCSI media changer driver. (accessed 2026-10-16)
  3. Cholia and Meyer. A Beta Test of Linear Tape-Open (LTO) Ultrium Data Storage Technology. LBNL-49327, NERSC, December 2001. (accessed 2026-10-16)
  4. Hull and Ranade. Performance Measurements and Operational Characteristics of a Large Automated Tape Library with a Cray Y-MP EL. NASA, 1994. (accessed 2026-10-16)

Further reading

  1. Robotic tape loader (accessed 2026-03-26)
Sources & caveats
  • Robot speed is available only as end-to-end mount times; no cited source isolates the picker's own travel time.
  • The sources date from 1994 and 2001 and each describes one library.
  • The SCSI-2 text is a draft standard read from a university mirror.

JSON: /data/terms/robotic-tape.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. Robotic tape loader. Hesela. 2026-10-22. https://hesela.dev/terms/robotic-tape/