tape-library · shipping · also automated tape library, tape silo

Tape library

A tape library is an automated system whose robot moves tape cartridges between storage slots and tape drives, so many cartridges can be mounted without an operator.

A 2001 laboratory report describes an LTO Ultrium library whose base frame held 281 slots, a 10-slot input/output station and up to 12 drives. Each expansion frame added 440 slots and 12 drives, so six frames reached 72 drives and 2,481 slots, 248.1 TB uncompressed. [2]

The testers measured mounts of 25 to 30 s, from slot to drive ready, and unmounts of 27 to 32 s. Three days of continuous commands, 8,980 mounts and 8,978 dismounts at 133 mounts per hour, produced no failures, and inventory took under 60 s per frame. Nominal drive figures were 20 s load-to-ready, 18 s unload and 95 s average search to the first byte. [2]

A 1994 study of a library of up to about 6,000 cartridges and 16 drives, tested with about 5,200 cartridges and eight drives, measured an average mount of 52.15 s, about 28 s for a single session. Drive allocation that ignores which silo holds a volume could at least double mount and dismount times through pass-throughs. [3]

Hosts control the library through the SCSI medium-changer model, which numbers robotics, slots, import/export slots and drives as elements and moves media with MOVE MEDIUM and EXCHANGE MEDIUM. [4] [5]

Relations

related
Magnetic tape storage, LTO (Linear Tape-Open), LTFS, Air-gapped backup, TapeAlert, Robotic tape loader, SCSI, Optical jukebox, Massive array of idle disks, MTBF

Advantages

  • Host software can drive libraries of different mechanical designs through the same changer command set. [4]

Limitations

  • Delivered throughput can fall short of the rated aggregate rate because host, disks, block size and compression also limit it, and the 2001 report recommends tape for large streamed files rather than online storage. [2]

Citations

  1. Cholia and Meyer. A Beta Test of Linear Tape-Open (LTO) Ultrium Data Storage Technology. LBNL-49327, NERSC, December 2001. (accessed 2026-10-16)
  2. Hull and Ranade. Performance Measurements and Operational Characteristics of a Large Automated Tape Library with a Cray Y-MP EL. NASA, 1994. (accessed 2026-10-16)
  3. SCSI-2 draft standard, clause 17: Medium-Changer Devices. (accessed 2026-10-16)
  4. Linux kernel documentation: SCSI media changer driver. (accessed 2026-10-16)

Further reading

  1. Tape library (accessed 2026-03-26)
Sources & caveats
  • The sources date from 1994 and 2001, so the absolute times show which components make up the delay, not what a current library achieves.
  • The 2001 report is a national-laboratory beta test of one library model; the 1994 study measured one installation for a space agency.
  • Drive load, unload and search times are the manufacturer's nominal figures quoted in the 2001 report; no prices or failure rates beyond the three-day test are given.
  • The SCSI-2 text is a draft standard read from a university mirror.
  • Arithmetic: 281 + 5 x 440 = 2,481 slots; 2,481 x 100 GB = 248.1 TB.

JSON: /data/terms/tape-library.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. Tape library. Hesela. 2026-10-22. https://hesela.dev/terms/tape-library/