simplessd · research · also SimpleSSD 2.0, Amber SSD simulator

SimpleSSD

SimpleSSD is an SSD simulation framework whose Amber generation models controller firmware, DRAM and flash within a full-system environment.

Full-system scope: Amber is the SimpleSSD 2.0 generation. Its gem5 integration models host data transfers alongside device firmware, allowing OS and application behavior to interact with the storage model. It is more than a NAND latency table. [1]

Firmware timing: The v2.0.12 model uses per-function instruction counts, with configurable cores for the host interface, internal cache and FTL. A zero core count disables that component's added firmware execution latency. In the pinned implementation, applyLatency returns zero and execute invokes the callback immediately when no core is selected; this is a modeling switch, not a physical zero-core SSD. [2] [3]

Mapping granularity: The documented PageMapping FTL can operate at superpage granularity through the PAL SuperblockSize setting. Its random-I/O tweak permits page-level write handling while retaining superpage I/O and page-level mapping memory requirements. That shortcut must be recorded when comparing mapping overhead or small writes. [4]

Validation scope: The 2018 paper compares selected real devices with configured models. Other tested devices were excluded after unstable performance, so those comparisons are not a representative sample of SSDs. Matching throughput trends does not establish tail-latency accuracy. [1]

Relations

related
MQSim, FlashShare, Flash translation layer (FTL)

Limitations

  • Changing firmware functions without regenerating their instruction-count table can leave timing estimates inconsistent with the revised code. [2, 3]

Citations

  1. Gouk et al. Amber: Enabling Precise Full-System Simulation with Detailed Modeling of All SSD Resources. MICRO 2018, sections IV-V. (accessed 2026-11-17)
  2. SimpleSSD 2.0.12 documentation: Firmware Execution Model (accessed 2026-11-17)
  3. SimpleSSD CPU model, commit 2be371619a65: instruction table, execute and applyLatency (accessed 2026-11-17)
  4. SimpleSSD 2.0.12 documentation: Flash Translation Layer and random-I/O tweak (accessed 2026-11-17)

Further reading

  1. Hesela: Sharing an SSD: who pays for the slowdown? (accessed 2026-11-17)
Sources & caveats
  • Primary-paper, versioned documentation and pinned-code review; no simulator run, hardware benchmark or reproduction of the authors' performance results.
  • The paper's latency-accuracy prose and Figure 9 contain different upper values; no combined accuracy range is reproduced here. [1]

JSON: /data/terms/simplessd.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. SimpleSSD. Hesela. 2026-11-17. https://hesela.dev/terms/simplessd/