tunnel-magnetoresistive-head · shipping · also TMR head, tunnel magnetoresistance read sensor

TMR read head

A tunnel magnetoresistive (TMR) read head senses bits with a magnetic tunnel junction whose resistance changes with the relative magnetization of its free and pinned layers.

In tunnelling magnetoresistance two ferromagnetic layers are separated by an insulating layer only a few atomic layers thick, through which electrons tunnel. Early junctions showed about 14% at low temperature, and in 1995 a CoFe/Al2O3/Co junction gave 24% at 4.2 K and 12% at room temperature. By 2007 about 50% at room temperature was common, more than in standard GMR materials, and Fe/MgO/Fe barriers sometimes exceeded 200%. [2]

One patented head design places the sensor between two shields, with a pinned layer coupled to an antiferromagnetic (AFM) layer, an MgO barrier and a free layer. Higher recording density needs narrower tracks and shield-to-shield spacing, so the AFM layer is recessed 10 to 500 nm from the air-bearing surface. Removing the AFM layer entirely had failed because such sensors are prevalently magnetically bi-directional. [4]

Read heads use TMR sensors for their high MR ratio, but the barrier's high resistance limits further shrinking. Beyond 4 Tb/in2 with heat-assisted or bit-patterned recording a resistance-area product below 0.1 ohm um2 is needed, which motivates all-metallic CPP-GMR sensors. [3]

Relations

related
Hard disk drive (HDD), Perpendicular magnetic recording (PMR), GMR read head, Magnetic tunnel junction, Flying height

Citations

  1. Scientific Background on the Nobel Prize in Physics 2007: The Discovery of Giant Magnetoresistance (accessed 2026-10-16)
  2. Improvement in CPP-GMR read head sensor performance using a Heusler alloy and CoFe bilayer electrode (accessed 2026-10-16)
  3. US 9,065,043 B1, Tunnel magnetoresistance read head with narrow shield-to-shield spacing (accessed 2026-10-16)

Further reading

  1. TMR read head (accessed 2026-03-26)
Sources & caveats
  • c2 is the 2007 Nobel scientific background; its figures are laboratory junction values, not head specifications.
  • c4 is a Western Digital patent (US 9,065,043 B1) describing one design; background and description sections only.
  • c3 is a 2024 open-access paper on CPP-GMR sensors that discusses TMR only in its introduction.
  • No source was found for when TMR heads entered products or for current head dimensions.

JSON: /data/terms/tunnel-magnetoresistive-head.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. TMR read head. Hesela. 2026-10-22. https://hesela.dev/terms/tunnel-magnetoresistive-head/