GMR read head
A GMR read head is a hard-disk read element that uses giant magnetoresistance in a stack of thin magnetic and non-magnetic layers to turn weak disk fields into resistance changes.
Giant magnetoresistance was discovered independently in 1988 in Fe/Cr/Fe trilayers and in (Fe/Cr)n multilayers with n up to 60, with layers only a few atoms thick. The multilayers' resistance fell by almost 50% in a field at 4.2 K, the room-temperature trilayer showed much less, and earlier anisotropic magnetoresistance gave at most a few per cent. [3]
The first GMR read head was launched in 1997 and soon became the standard, since smaller, weaker bits need more sensitive heads. The head turns small magnetic changes into a current signal that represents ones and zeros. [2]
The head stacks a free layer, often nickel-iron, next to the disk, a non-magnetic spacer such as copper, a pinned layer of fixed orientation, often cobalt, and an exchange layer, with low resistance when free and pinned magnetisations align. The preceding AMR heads of 1991 gave about four times the capacity of induction heads. [4]
Tunnel magnetoresistance junctions reached 24% at 4.2 K and 12% at room temperature in 1995, around 50% at room temperature by 2007 and over 200% with MgO barriers, and were expected to dominate over GMR sensors. [3]
Relations
- related
- Hard disk drive (HDD), Longitudinal magnetic recording, TMR read head, Areal density, Head-disk interface (HDI)
Limitations
- Layers only a few atoms thick depend on thin-film deposition techniques developed from the 1970s onward. [2]
Citations
- Royal Swedish Academy of Sciences. The 2007 Nobel Prize in Physics, press release, 9 October 2007.
- Royal Swedish Academy of Sciences. The Discovery of Giant Magnetoresistance, scientific background on the 2007 Nobel Prize in Physics.
- National High Magnetic Field Laboratory. Giant Magnetoresistance, Magnet Academy explainer.
Further reading
Sources & caveats
- The Nobel documents date from 2007, so their present-tense statements mean 2007.
- The 4.2 K and room-temperature figures describe laboratory samples, not head performance in a drive.
- The magnet laboratory page is an educational explainer, not a standard or paper.
- No open source giving a measured areal density for GMR heads was found, so none is stated.