Willow
Willow is a research SSD architecture that lets applications install storage-side programs to extend device operations under host-managed access permissions.
Programming: SSD Apps combine device-side code, a host library and, when needed, a kernel module. They can change storage semantics or offload control work; programmability is broader than bulk data processing. [2]
Protection: The host kernel is trusted. Hardware carries the originating process identity through RPCs; SPU-OS checks extent permissions on storage transfers and separates each app's local code and data. A missing permission entry can require a host round trip. [1]
Prototype: Eight FPGA-based storage processors use DDR2 DRAM to emulate PCM, with configured read/write latencies of 48/150 ns. These are modeled media timings, not end-to-end request latencies or NAND measurements. [1]
Completion: Append's coordinator response gives a starting address and write count. Completion requires all APPENDDONE notifications; failed writes need reissue through Direct-IO. The filesystem still allocates physical space. An initial response alone is not a successful append. [1]
Relations
- related
- Computational storage drive, IceClave
Limitations
- The 1 GHz processor bar in Figure 5 is a projection; the prototype processor runs at 125 MHz. [1]
Citations
- Seshadri et al. Willow: A User-Programmable SSD. OSDI 2014, pp. 67-80, sections 2.6, 3, 4.2 and 4.6.
- Seshadri et al. Willow: A User-Programmable SSD. OSDI 2014 presentation, slides 5-11.
Further reading
Sources & caveats
- Primary-source synthesis, not a hardware reproduction, security audit or current-device benchmark.
- The Append comparison uses modified Ext4, 1 kB appends and 64 MB preallocation; Base-IO uses O_DSYNC. [1]