Winchester disk architecture
Winchester disk architecture combines low-mass, lightly loaded flying heads with lubricated disks in a protected head-disk assembly; it does not require non-removable media.
IBM's 1973 3340 used removable 3348 modules containing the disks, heads, carriage and spindle. Keeping each head with its recorded surface avoided the interchange alignment adjustments of conventional disk packs. The heads touched the disk at start and stop, not during normal recording. Mulvany's contemporary design paper describes a drive-operated sliding door and a filtered-air interface: protected packaging is not a claim of a permanently hermetic cartridge. Later fixed assemblies should not be projected backward onto the original removable module. The 2004 participants attributed the Winchester name to a proposed pair of 30 MB spindles, not the final 35/70 MB module capacities; that naming account is retrospective.
Relations
Advantages
- Dedicated head/surface pairing reduced interchange alignment requirements while retaining removable modules. [2]
Limitations
- The historical name does not specify modern head geometry, interface, capacity or a hermetic seal. [2]