Zip drive
The Zip drive is a removable magnetic disk cartridge format of the 1990s, with 100, 250 and 750 MB media presented to the operating system as a block device with 512-byte sectors.
A 100 MB disk reports 100,663,296 bytes (196,608 sectors, exactly 96 MiB) and a 250 MB disk 250,640,384 bytes (489,532 sectors). The same 100 MB disk appears as 96/64/32 or 1024/4/48 on different controllers, and a 250 MB ATAPI drive reports 239/64/32, which is 30 KiB less than the disk. [2] A mini-HOWTO describes the 100 MB disk as 96 cylinders of 2048 sectors of 512 bytes, seen by the kernel as a SCSI direct-access device. [3]
The ATAPI removable-drive specification treats such media as big floppies without a partition table, but disks prepared with the maker utilities carry one, usually a single fourth entry, so they mount as the fourth partition. One drive version had a jumper hiding the first 32 sectors, turning 196,608 sectors into 196,576, so the same disk could work on one machine and fail on another. [2]
The kernel parallel-port driver presents the embedded controller as a SCSI host adapter over nibble, byte and EPP modes and sets can_queue to 1. [5] A library guide lists capacities of 100, 250 and 750 MB, requires a drive of matching or higher capacity, gives disk dimensions of 97 x 98 x 6 mm against 90 x 94 x 3 mm for a 3.5-inch floppy and notes the same file systems as floppies. [4] Arithmetic: that is about 2.25 times the floppy volume, and a 100 MB disk is about 68 times a 1,474,560-byte floppy.
Relations
Advantages
- Attachment options were parallel port, SCSI, ATAPI or IDE, USB and FireWire, but not every interface existed on every capacity: the 100 MB drive had parallel, SCSI and USB, the 250 MB drive added FireWire, and the 750 MB drive had no SCSI. [3][4]
Citations
- Zip drives: Size and geometry and partition table of ZIP drives, Andries Brouwer
- Zip Drive Mini-HOWTO: The ZIP drive (The Linux Documentation Project)
- Media Recognition Guide: Zip Disks, Victoria Sloyan, Bodleian Libraries, 22 March 2010
- Linux kernel drivers/scsi/ppa.c and imm.c (parallel-port SCSI host-adapter drivers)
Further reading
Sources & caveats
- The geometry page is by an operating-system kernel contributor who states that he has no hardware and that the page holds no first-hand information, so it is second-hand; its statement that a drive may alter data written to sector 0 was not verified and is not used.
- The mini-HOWTO is undated community documentation referring to 2.0.x kernels.
- The library guide is written for archivists, not a standards document; its transfer rates of 1 MB/s against 15.6 KB/s for a floppy were not verified and are not used.
- No specification of the cartridge or the drive command set was available; the ATAPI statement is relayed through the geometry page, and the 1,474,560-byte floppy figure is not from these sources.
- Arithmetic: 96 x 64 x 32 = 1024 x 4 x 48 = 96 x 2048 = 196,608; 489,532 - 489,472 = 60 sectors = 30 KiB; 32 sectors = 16 KiB; 97 x 98 x 6 = 57,036 mm3 against 90 x 94 x 3 = 25,380 mm3.
- No sales, price or market statements are made.