heatwatch · research

HeatWatch

HeatWatch is a research controller mechanism that predicts NAND read-reference voltages from wear, temperature history, retention time and dwell history.

Related Observatory article: Read on hesela.com

It tracks thermal exposure and per-block metadata, then tunes its model using sampled wordlines. This changes sensing rather than heating cells or resetting wear. Background calibration still requires reads. [1]

Raw-NAND read-retry callbacks expose device-specific sensing controls; they are not a portable NVMe host interface. [2]

Relations

related
NAND dwell time, NAND self-recovery, Effective retention time, Retention Model Aware Reading (ReMAR), NAND read-reference voltage

Limitations

  • The trace-driven lifetime estimate uses an assumed ECC threshold, not observed SSD service years. [1]

Citations

  1. Luo, Ghose, Cai, Haratsch and Mutlu. HeatWatch. HPCA 2018, sections 3-5. DOI: 10.1109/HPCA.2018.00050. (accessed 2026-11-18)
  2. Linux MTD NAND driver API: read-retry callbacks and interface scope. (accessed 2026-11-18)

Further reading

  1. Hesela: interpreting HeatWatch lifetime ratios and workload aggregation. (accessed 2026-11-18)
Sources & caveats
  • Primary-source synthesis, not a hardware reproduction. Historical charge-trap characterization does not establish modern QLC performance.

JSON: /data/terms/heatwatch.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. HeatWatch. Hesela. 2026-11-18. https://hesela.dev/terms/heatwatch/