Memristor storage
A memristor is a circuit element proposed in 1971 that relates charge and flux, and the name is also used for thin-film devices whose resistance depends on past current.
Chua reasoned in 1971 that a fourth fundamental passive element should exist, with memristance relating charge and flux. A 2008 model treats a thin film between two metal contacts with a doped low-resistance region and an undoped high-resistance region, where bias drifts the dopants and moves the boundary. The effect scales as 1/D^2, so it is 1,000,000 times stronger at nanometre than at micrometre scale, and a Pt/TiO2/Pt cross-point device with a 5 nm oxide matched the model. [2]
Resistive RAM uses a metal-insulator-metal cell whose states come from forming and rupturing a conductive filament, of metal ions in conductive-bridge cells or oxygen vacancies in oxide cells. Reported devices read and write in under 10 ns, retain data over 10 years and endure 10^6 to 10^12 cycles, against over 10^4 for NAND flash. Oxide cells reach about 10^12 cycles and conductive-bridge cells about 10^6, still too few to replace DRAM. [3]
No single device has combined fast switching, low power and stable operation, and random filament formation causes cycle-to-cycle and device-to-device variability, the main obstacle to industrialisation. Read noise narrows the margin, and at most 8 states per cell have been shown. [3] In 2008 ultrahigh endurance had not been convincingly shown, with about 10^6 cycles for a nickel-oxide cell and about 600 for a copper-oxide cell switching in under 50 ns. [4]
Relations
Limitations
Citations
- The missing memristor found
- Resistive Random Access Memory (RRAM): an Overview of Materials, Switching Mechanism, Performance, Multilevel Cell (mlc) Storage, Modeling, and Applications
- Overview of candidate device technologies for storage-class memory
Further reading
Sources & caveats
- c2 is by HP Labs authors (Nature, 2008); c4 is an IBM Research review (2008); c3 is a university review (2020).
- Figures in c3 are ranges collected from different published devices, not one product; c3 and c4 are more than a decade apart and not directly comparable.
- No cited source gives capacity, cost per bit or product availability.
- Whether every resistive-switching memory is a memristor is a modelling question the sources leave open; c3 uses the term RRAM.