phase-change-memory · cancelled · also PCM, Phase change RAM

Phase-change memory (storage)

Phase-change memory (PCM) stores a bit as the resistance of a chalcogenide cell, switched between amorphous and crystalline states by current pulses of different shape.

A short, large pulse melts the cell and rapid cooling leaves the high-resistance amorphous reset state. Setting relies on threshold switching, a sudden drop in amorphous resistance above a threshold voltage that lets Joule heating crystallise the cell. Ge2Sb2Te5 on the GeTe-Sb2Te3 line keeps its amorphous phase for about 10 years at roughly 100 degrees C yet recrystallises in under 10 ns near 500 degrees C, switching under 1 ns has been reported, and write-and-verify reached 16 resistance levels. [2]

A 2009 model derived SET at 150 ns and 13.5 pJ and RESET at 40 ns and 19.2 pJ, with reads about 4.4 times and writes 12 times DRAM latency. A baseline PCM main memory was 1.6 times slower and used 2.2 times more energy than DRAM, narrowed to 1.2 and 1.0 times by buffer reorganisation, and partial writes gave a 5.6-year projected lifetime. Surveyed endurance ranged from 10^4 to 10^9 writes, and multi-level cells were usually limited to two bits. [3]

Reset current scales with electrode contact area at about 40 MA/cm2, and carbon-nanotube electrodes cut it to a few microamps. A 5 x 5 x 5 nm bit would need about 150 aJ at the ideal 1.2 aJ per cubic nanometre. The access device is usually larger than the cell, and cells fail through voids at the electrode or antimony segregation. A small cell reached 10^11 cycles at 45 pJ, and very small cells risk threshold voltages near the read voltage. [2]

Relations

related
3D XPoint, Intel Optane, NAND flash, Storage-class memory (SCM), Memristor storage, Persistent memory

Citations

  1. Phase change materials and phase change memory (accessed 2026-10-16)
  2. Architecting Phase Change Memory as a Scalable DRAM Alternative (accessed 2026-10-16)

Further reading

  1. Phase-change memory (storage) (accessed 2026-03-26)
Sources & caveats
  • c2 is a 2014 MRS Bulletin review; c3 is an ISCA 2009 paper by Microsoft Research and university authors; figures describe prototypes and models, not shipping devices.
  • The endurance range in c3 comes from the authors' own literature survey, and its currents were extrapolated across process generations.
  • c2 extrapolates the 10^11-cycle result to 6.5e15 cycles at 3.6 pJ; this is not repeated as a measurement.
  • The status field refers to a commercial product line that the sources do not discuss; they do not establish which cell technology any product used.
  • Arithmetic: 1.2 aJ/nm3 x 125 nm3 = 150 aJ.

JSON: /data/terms/phase-change-memory.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. Phase-change memory (storage). Hesela. 2026-10-22. https://hesela.dev/terms/phase-change-memory/