all-flash-array · shipping

All-flash array

A storage array that uses flash media for persistent data storage rather than an HDD tier.

Related Observatory article: Read on hesela.com

An array is a system of storage devices and control software, not an individual SSD. [9]

An all-flash array stores data on flash media rather than an HDD tier. Host connectivity and drive-side interfaces are separate design choices: NVMe drives or flash modules do not require every host connection to use NVMe over Fabrics. A controller can support NVMe alongside other host attachment options. [4]

Capacity: Compression and deduplication can reduce the physical footprint of stored data. Thin provisioning instead defers backing allocation for unwritten logical space. Reports may combine these effects under an efficiency label, so a headline ratio must identify its numerator, denominator and included features. [5] [7]

Comparison: Separate raw device capacity, configured usable capacity, current used space and workload-dependent effective-capacity estimates. A quoted reduction factor is not guaranteed headroom for future writes. [6]

Write path: All-flash does not exclude controller memory. The cited controller design uses cache and batteries supporting pending writes through power loss. [4] During normal operation with both HA partners available, the documented pair's write requests are logged in both nodes' NVRAM before acknowledging them; the partner commits outstanding writes during takeover. These are product-specific mechanisms, not guarantees implied by flash media. [8]

Access: The all-flash label does not select block access, file access or both. Check the documented protocols of the specific configuration. [10]

Relations

related
Enterprise SSD, SAN, NVMe, NVMe over Fabrics, Data deduplication, Hybrid flash array, Flash module, NAND flash, RAID, Thin provisioning, Raw capacity, Usable capacity, Effective capacity, Data-reduction ratio, Power loss protection, Data durability, Failure domain, Non-volatile random-access memory, ONTAP consistency point, Storage array, NAS

Advantages

  • No seek or rotational latency, so random I/O performance is far less dependent on spindle count

Limitations

  • The all-flash label alone does not specify endurance, recovery behavior or sustained performance. [4]

Citations

  1. IBM Storage FlashSystem 5200 Product Guide (IBM Redbooks) (accessed 2026-10-22)
  2. NetApp ONTAP: capacity reporting and measurements (accessed 2026-10-22)
  3. SNIA Dictionary: effective capacity (accessed 2026-10-22)
  4. NetApp HCI 1.9: dashboard capacity and thin-provisioning efficiency (accessed 2026-10-22)
  5. NetApp ONTAP 9: Learn about high availability pairs. NVRAM logging, takeover and shared-nothing scope. (accessed 2026-10-27)
  6. SNIA Dictionary: storage array, devices, control software and abstracted storage. (accessed 2026-10-31)
  7. NetApp ASA r2 documentation: differences from ASA, AFF and FAS, SAN and NAS protocol support. (accessed 2026-10-31)

Further reading

  1. FlashArray//X All-Flash, NVMe Array Datasheet (Pure Storage) (accessed 2026-10-10)
  2. What Is Data Reduction? (Everpure / Pure Storage) (accessed 2026-10-10)
  3. NetApp All Flash FAS datasheet (accessed 2026-10-10)
Sources & caveats
  • IBM's FlashSystem 5200 guide is an architecture example, not a specification shared by every all-flash array. [4]
  • Product-generation reduction averages in the earlier note are not a workload-independent capacity guarantee.
  • The all-flash label's limits are an engineering inference from the separation of media, interface and configured system services.
  • Controller-memory examples are source review, not a power-cut or failover experiment. IBM Redpaper REDP-5617 (Storage Virtualize 8.6), printed pages 27 and 43; ONTAP HA-pair behavior must not be generalized to every array. [4] [8]
  • NetApp's comparison lists ASA r2 as SAN-only and AFF with both SAN and NAS support. This is a product-family example, not a protocol requirement for all storage arrays. [10]

JSON: /data/terms/all-flash-array.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. All-flash array. Hesela. 2026-10-31. https://hesela.dev/terms/all-flash-array/