Solid-state drive (SSD)
A solid-state drive is a storage device that retains data in nonvolatile semiconductor memory without moving recording media.
Most SSDs use NAND, but the device category does not specify media, protocol or packaging [1]. In conventional NAND SSDs, an FTL maps logical addresses to physical locations; out-of-place updates and reclamation are controller work [2]. SSD, NVMe and M.2 are not synonyms [3]. The former firstSeen=2007 value is unsupported as a category-wide origin: Samsung lists its own 2006 SSD, not an industry first [6]. Historical RAM-based products and flash-based products need separate milestones.
Relations
- related
- NAND flash, NVMe, Serial ATA (SATA), Enterprise SSD, Consumer SSD, Flash translation layer (FTL), Bad block management, NAND channel, Direct I/O, Serial Attached SCSI (SAS), M.2, Power loss protection, SSD steady state, Garbage collection (flash), Wear leveling, Solid-state media, Sequential I/O, Random I/O, FlashGraph
Advantages
- No mechanical seek or rotational delay is required to access the recording medium. [1]
Limitations
- NAND endurance and workload performance require model-specific conditions; a generic SSD label is not a lifetime guarantee. [4]
- Nonvolatile media does not by itself protect volatile cached writes or mapping metadata during power loss. [5]
Citations
- SNIA: What is an SSD? Media, interfaces and form factors.
- Agrawal et al. Design Tradeoffs for SSD Performance. USENIX ATC 2008, sections 2.1 and 3.1-3.4.
- NVM Express: NVMe Form Factors, Part III: The Importance of Form. M.2 interface distinction.
- SNIA: Endurance of NVMe, SAS, and SATA SSDs. Endurance, workload and deallocation.
- Kingston: SSD Power Loss Protection. Hardware and firmware protection scope.
- Samsung: Industry's First 4-bit Consumer SSD. Vendor production-history table lists its 2006 SLC SSD; not a first-ever SSD claim.