drum-memory · end of life · also magnetic drum memory, magnetic drum, drum store

Drum memory

Drum memory stores data as magnetic patterns on a rotating cylinder, with access timed to the passage of a selected location under a head.

Related Observatory article: Read on hesela.com

A fixed-head drum selects a track electronically, then waits for the requested location to reach its head; direct addressing does not eliminate rotational waiting. [3]

In the documented 1955 drum design, at 12,500 rpm, a revolution takes 4.8 ms; 2.4 ms is mean rotational waiting for uniformly distributed arrival phase, excluding transfer and processing. [2]

A drum can serve as working memory rather than only bulk storage. Its mechanism differs from ferrite-core memory, which selects stored magnetic states electrically without a rotating medium. [3]

A 1961 small-computer drum of 290 mm diameter turned at 2,500 rpm with 12 ms average access and about 150,000 bits on 30 tracks, and a 1975 unit with heads floating about 1 µm above the surface had 1,024 tracks, 6,000 rpm, 5.3 ms average access, 15 MB and 12 Mbit/s. [6] [5] Half a revolution is 12 ms at 2,500 rpm and 5 ms at 6,000 rpm.

A 1955 survey lists a 4,000-word drum at 8,500 µs average access, against an average random tape search of 4 minutes. [4]

Relations

related
Magnetic-core memory, Rotational latency, Hard disk drive (HDD), IBM RAMAC, Major-minor loop architecture

Limitations

  • One head per track makes the head count grow with the track count, and the heads must stay very close to the surface. [4, 5]

Citations

  1. IBM 650 Magnetic Drum Data Processing Machine (1955), PDF pp. 5-6 (accessed 2026-10-18)
  2. IBM: World of Numbers (1958), PDF p. 18, Magnetic Drum and Magnetic Cores (accessed 2026-10-18)
  3. Weik. A Survey of Domestic Electronic Digital Computing Systems. Ballistic Research Laboratories Report No. 971, December 1955. (accessed 2026-10-16)
  4. IPSJ Computer Museum: Magnetic drum unit, 1975. (accessed 2026-10-16)
  5. IPSJ Computer Museum: Magnetic drum units, 1961. (accessed 2026-10-16)

Further reading

  1. Drum memory (accessed 2026-03-26)
Sources & caveats
  • Timing is calculated from the 1955 brochure's rotation speed. [2]
  • The 1955 survey is a questionnaire-based compilation read through an unproofread OCR transcription; only unambiguous entries are used.
  • The museum pages are secondary descriptions of individual products.
  • Arithmetic: half a revolution is 12 ms at 2,500 rpm and 5 ms at 6,000 rpm against 5.3 ms listed; 15 MB / 1,024 tracks is about 14.6 kB per track.

JSON: /data/terms/drum-memory.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. Drum memory. Hesela. 2026-10-22. https://hesela.dev/terms/drum-memory/