hmb · shipping · also HMB

Host memory buffer (HMB)

Host Memory Buffer is an optional NVMe feature through which a controller uses assigned host-memory ranges.

Related Observatory article: Read on hesela.com

The host enables HMB through Set Features (feature identifier 0Dh). Its contents are vendor-specific: cached FTL mapping entries are a documented use, not a required layout. Unlike Controller Memory Buffer (CMB), HMB resides in host memory. [1] [4]

NVMe 1.4a requires correct operation without HMB and protection against data loss or corruption on surprise removal while HMB is used. These requirements do not establish protection for every in-flight write. [1] [5]

HMPRE and HMMIN specify requested memory in 4 KiB units; HSIZE describes allocation in CC.MPS memory-page units. EHM reports enablement separately. [1]

While HMB is enabled, the host must not modify its descriptor list or assigned memory. Successful completion of disabling HMB permits host reuse. When enabling HMB with Memory Return (MR)=1, the size, descriptor-list address, descriptors and buffer contents must match what the controller last saw before HMB was disabled. MR=0 specifies an allocation whose contents are undefined to the controller. This return contract is not a persistence guarantee. [1] Re-enabling an enabled HMB returns Command Sequence Error; disabling an already disabled HMB succeeds without changing state. [1]

Relations

related
NVMe, Consumer SSD, PCIe storage attachment, Flash translation layer (FTL), SSD DRAM cache, SSD mapping cache, FTL translation page, Controller Memory Buffer (CMB), NVMe Persistent Memory Region (PMR)

Advantages

  • Host-provided working memory can support an SSD architecture without onboard DRAM. [2]
  • More space for cached FTL tables can reduce address-mapping overhead. [4]

Limitations

  • Actual allocation and performance depend on host support and device implementation. [1, 2]
  • Cache allocation does not specify hold-up energy or the recovery procedure for interrupted writes. [5]

Citations

  1. NVM Express 1.4a (9 March 2020), sections 5.15.2.2, 5.21.1.13 and 8.9. Copyright 2007-2020 NVM Express, Inc. (accessed 2026-11-12)
  2. KIOXIA: HMB (Host Memory Buffer) technology for DRAM-less SSDs, 28 August 2018. (accessed 2026-10-12)
  3. Micron: Optimizing storage with host assists for the AI PC of the future. (accessed 2026-10-18)
  4. Micron: Client vs. Data Center SSDs, December 2023, page 5: data-at-rest and data-in-flight protection. (accessed 2026-10-18)
  5. Kim and Kim (2020). HMB in DRAM-less NVMe SSDs: Their usage and effects on performance. PLOS ONE 15(3): e0229645, section IV, Figure 10. (accessed 2026-10-18)

Further reading

  1. SSD mapping caches: why DRAM size is not a speed rating (accessed 2026-10-12)
  2. Hesela: Host Memory Buffer (HMB). (accessed 2026-10-18)
Sources & caveats
  • Protocol statements use NVMe 1.4a. KIOXIA and Micron describe implementations, not an independent comparison of all DRAM-less SSDs.
  • Kim and Kim's 2020 size-sweep evidence did not establish the mapping-cache interpretation for fixed-allocation SSD-B. [7]

JSON: /data/terms/hmb.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. Host memory buffer (HMB). Hesela. 2026-11-12. https://hesela.dev/terms/hmb/