nearline-sas · shipping · also NL-SAS

Nearline SAS

Nearline SAS (NL-SAS) is a class of high-capacity, typically 7,200-rpm 3.5-inch hard drives that use the SAS interface and SCSI command set for bulk capacity tiers.

Related Observatory article: Read on hesela.com

NL-SAS names the interface and duty class of a drive, not a recording technology, and rotation speed and connection technology are largely independent choices. [4] One 7,200-rpm 3.5-inch capacity model of 10 to 18 TB lists two full-duplex SAS-3 ports at 12 Gbit/s, up to 1,200 MB/s per port, a 512 MiB buffer, 268 MiB/s typical sustained rate and average seeks of 7.5 ms for reads and 8.6 ms for writes. [2]

A read-cache hit can be served from the buffer without another disk access. Sustained media transfer and the interface's instantaneous transfer limit describe different paths, so link rate alone does not predict host throughput. [2] [5]

The MG09 manual also lists 6, 3 and 1.5 Gbit/s operation, and notes host and transmission limits. Check the negotiated rate: a slower link can constrain delivery even when reads reach the medium. [2]

One revolution at 7,200 rpm takes 8.33 ms, so average rotational latency is about 4.17 ms, against 2.0 ms at 15,000 rpm. The same specification gives an MTTF of 2,500,000 hours (AFR 0.35%) and 10 unrecoverable read errors per 10^16 bits, assuming 8,760 power-on hours per year, at most 40 °C and 550 TB per year. [2]

A field study of about 100,000 drives found annual replacement rates of typically 2 to 4% against datasheet AFRs of 0.58 to 0.88%, with no clear reliability difference between SATA drives and SCSI or Fibre Channel drives. [3]

In older storage vocabulary nearline means media brought online without human intervention, such as tape in a library, and that usage regards the label for slower always-on disks as a misuse. [4]

Relations

related
Nearline HDD, Serial Attached SCSI (SAS), Serial ATA (SATA), SCSI, Hard disk drive (HDD), Dual-port drive, Rotational latency, Mission-critical HDD, Annualized failure rate (AFR), MTBF

Advantages

  • Example dual-port configurations cover both internal cabled and internal backplane environments over point-to-point SAS links. [2]

Limitations

  • A faster link does not by itself increase the drive's sustained media transfer rate; cache-resident transfers and end-to-end host throughput are separate questions. [2, 5]
  • Nearline has no formal standard definition, so the label alone does not fix rotation speed, capacity or workload rating. [4]
  • On Exos X18 SAS drives, prefetch and read-cache controls are independent: prefetched blocks can satisfy later reads even when read caching is disabled. Record both settings when interpreting media-read measurements; the manual distinguishes prefetch hits from read-cache hits. [5]

Citations

  1. Toshiba. MG09SCA/MG09SCP Series Product Manual, 3.5-inch 7,200-rpm 12 Gbit/s SAS HDD, rev. 02, December 2021. (accessed 2026-11-06)
  2. Schroeder and Gibson, Disk failures in the real world: What does an MTTF of 1,000,000 hours mean to you? (USENIX FAST 2007) (accessed 2026-10-16)
  3. IBM Support: The Correct Use of the term Nearline (accessed 2026-10-16)
  4. Seagate Exos X18 SAS Product Manual, Rev. F (May 2021), sections 4.1.3 and 4.3-4.4.2: transfer rates, cache and prefetch (accessed 2026-11-06)

Further reading

  1. Nearline SAS (accessed 2026-03-26)
Sources & caveats
  • Interface, seek and reliability figures come from one drive maker's product manual (rev. 02, December 2021) and apply to that model family only.
  • The field study is independent university work from 2007 on drives of an earlier generation.
  • The objection to the nearline label is the view of one storage company's author in a support article.
  • Arithmetic: 60 / 7,200 s = 8.33 ms per revolution, half of which is 4.17 ms; 60 / 15,000 / 2 = 2.0 ms.
  • Cache behavior follows the MG09 and Exos X18 SAS manuals. It does not establish a measured speedup for a different link, workload or drive.

JSON: /data/terms/nearline-sas.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. Nearline SAS. Hesela. 2026-11-06. https://hesela.dev/terms/nearline-sas/