mission-critical-hdd · limited · also enterprise performance HDD, 10K/15K HDD

Mission-critical HDD

A mission-critical HDD is a 10,000 or 15,000-rpm enterprise hard drive, usually SAS with small capacity, built for low latency and data integrity in transactional workloads.

The class is defined by rotation speed and duty, not by a standard, and common usage separates four-digit speeds of 5,400 and 7,200 rpm from five-digit speeds of 10,000 and 15,000 rpm. [4] Average rotational latency is half a revolution, 3.0 ms at 10,000 rpm and 2.0 ms at 15,000 rpm against 4.17 ms at 7,200 rpm.

One 2.5-inch 15,000-rpm SAS model of 300, 600 or 900 GB states 2.0 ms average rotational latency, 12 Gbit/s SAS with up to 1,200 MB/s per port and 2,400 MB/s with both ports, and 210 to 315 MB/s sustained transfer. Its AFR of 0.44% (MTBF 2,000,000 hours) over a five-year life assumes 8,760 power-on hours per year, at most 50 °C HDA temperature and 26 °C wet-bulb ambient, and is a population statistic, not a prediction for one unit. [2]

T10 Protection Information adds 8 bytes to each 512-byte block, costing about 1.56% of sequential performance, and a non-volatile cache protects write data on unexpected power loss. [2]

In a field study of about 100,000 drives, two 15,000-rpm SCSI populations with a datasheet MTTF of 1,500,000 hours (0.58% AFR) were replaced at 3.0% and 3.7% per year, and rates across all drive types were typically 2 to 4%. [3]

Relations

related
Hard disk drive (HDD), Enterprise SSD, Nearline SAS, Nearline HDD, Serial Attached SCSI (SAS), Rotational latency, Seek time, Protection information (PI), Annualized failure rate (AFR), MTBF, Interlaced magnetic recording

Advantages

  • Protection Information can be generated and checked at the host bus adapter, so integrity checking covers the path to the drive. [2]
  • Unrecovered read errors are specified below 1 sector per 10^16 bits transferred. [2]

Limitations

  • The sustained media rate is far below the per-port interface rate, so link speed does not describe drive throughput. [2]

Citations

  1. Seagate. Enterprise Performance 15K HDD Product Manual, Rev. C, September 2020, sections 4.2-5.2 and 9.5. (accessed 2026-10-16)
  2. Schroeder and Gibson. Disk Failures in the Real World: What Does an MTTF of 1,000,000 Hours Mean to You? USENIX FAST 2007. (accessed 2026-10-16)
  3. IBM Support: The Correct Use of the term Nearline (accessed 2026-10-16)

Further reading

  1. Mission-critical HDD (accessed 2026-03-26)
Sources & caveats
  • Drive figures come from one drive maker's product manual (Rev. C, September 2020) for one model family.
  • The field study is independent university work from 2007 on drives of an earlier generation; a third 15,000-rpm population at 3.1% has no listed datasheet MTTF.
  • The four-digit and five-digit speed split is described, and objected to, by one storage company's author in a support article.
  • Arithmetic: 60 / rpm / 2 gives 3.0 ms at 10,000 rpm, 2.0 ms at 15,000 rpm and 4.17 ms at 7,200 rpm; 8 / 512 = 1.56%.

JSON: /data/terms/mission-critical-hdd.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. Mission-critical HDD. Hesela. 2026-10-22. https://hesela.dev/terms/mission-critical-hdd/