qlc-ssd · shipping · also quad-level cell SSD

QLC SSD

A QLC SSD uses NAND flash that encodes four bits per cell using sixteen threshold-voltage states.

Encoding: Four bits instead of three gives 4/3 as many encoded bits at equal cell count, not twice the capacity of TLC. Finished-drive capacity also includes reserved space and error-correction overhead. [4]

Calibration: Partially programmed blocks can contain pages with different stress histories; a shared read-voltage adjustment can therefore mismatch some pages. [2]

Relations

related
Quad-level cell (QLC), Consumer SSD, Enterprise SSD, TLC SSD, PLC, NAND flash, NAND read-retry, LDPC (NAND ECC), Open NAND block, Lateral charge spreading

Citations

  1. Papandreou et al. - Open Block Characterization and Read Voltage Calibration of 3D QLC NAND Flash, IRPS 2020 (accessed 2026-10-16)
  2. Kwon et al. - STAR, arXiv:2511.06249v1 (2025), Table I, Section VI-A and Figure 9 (accessed 2026-10-16)
  3. KIOXIA - Multi-level cell technology: bits and threshold-voltage states (accessed 2026-10-16)
  4. Hesela - 3D NAND retention: STAR v1 consistency check (accessed 2026-10-16)

Further reading

  1. QLC SSD (accessed 2026-03-26)
Sources & caveats
  • Papandreou et al., IRPS 2020, Sections III-IV: chip characterization and read calibration, not fleet reliability or a whole-drive endurance rating. [2]
  • STAR v1's Section VI-A cycle pairs do not arithmetically match its stated percentage gains; Table I timings are emulator inputs. No universal QLC/TLC lifetime ratio follows. [3] [5]

JSON: /data/terms/qlc-ssd.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. QLC SSD. Hesela. 2026-10-17. https://hesela.dev/terms/qlc-ssd/