Seek time
Seek time is the time a hard disk actuator needs to move the heads to a target track, through acceleration, coasting, deceleration and settling, excluding rotation and transfer.
A seek accelerates, coasts at full speed on long moves, decelerates and then settles over the track, and with rotation it is among the most costly disk operations. [3] Seeks shorter than about 200 to 400 cylinders stay in constant acceleration, so their time grows with the square root of distance plus settle, while long seeks grow linearly plus a fixed overhead. [2]
Settling often takes 0.5 to 2 ms [3], and very short seeks of two to four cylinders take 1 to 3 ms, mostly settle. Accelerations of 30 to 40 g were needed, and halving seek time takes four times the power. For independent requests the mean seek distance is a third of the stroke, but quoting the one-third-stroke time as an average misleads, and replacing a linear curve with a measured one removed a 2.66 ms mean model error, about 9% of I/O time. [2]
In a textbook example a 15,000 RPM drive averages 4 ms per seek and a 7,200 RPM drive 9 ms. [3] At 7,200 RPM the average rotational delay adds about 4.2 ms, so positioning alone costs about 13 ms, roughly 76 random accesses per second.
Relations
- related
- Hard disk drive (HDD), Dual-actuator HDD, ST-412, Rotational latency, Independent access range (Linux), Concurrent positioning range (ATA), Embedded servo, Position error signal (PES)
Advantages
- Keeping related data on nearby tracks cuts seek cost, since short seeks are mostly settle time. [2]
Citations
- An Introduction to Disk Drive Modeling, IEEE Computer 27(3)
- Operating Systems: Three Easy Pieces, chapter 37: Hard Disk Drives
Further reading
Sources & caveats
- c2 is a 1994 paper (OCR reprint hosted by the CMU Parallel Data Lab) measuring drives of that era; c3 is a free university textbook whose example drives are not named here.
- No measured modern seek figures are given; current specifications vary by model.
- Arithmetic: 60 s / 7,200 / 2 = 4.17 ms; 9 + 4.2 = 13.2 ms; 1 / 13.2 ms = 76 per second, ignoring caching, queuing and transfer.