e1-s · shipping · also E1.S SSD, EDSFF 1U Short, SFF-TA-1006

E1.S

E1.S is the short EDSFF device form-factor family specified by SFF-TA-1006 for compatible 1U systems, with several enclosure and cooling configurations.

Related Observatory article: Read on hesela.com

The bare card is 111.49 by 31.5 mm; enclosed variants are 118.75 by 33.75 mm. Thickness options are 5.9 mm bare, 8.01 mm with a heat spreader, 9.5 mm symmetric, and 15 or 25 mm asymmetric. The bare-card footprint is not the envelope of every E1.S device. Check its housing drawing and revision. [2]

Initial slot limits are 12 W for 5.9/8.01 mm and 25 W for 9.5/15/25 mm variants. The connector-derived 79.2 W ceiling (6.6 A at 12 V) is not a host power guarantee; sustained power and cooling depend on the platform. Thermal requirements reference SFF-TA-1023. There is no universal thermal ranking against M.2 or U.2. [2]

Rev 1.0 dates to January 2018, the E1.S name to Rev 1.2 (April 2019), and the 15 mm option to Rev 1.4 (March 2020). Rev 2.0 (December 2025) changes the 9.5 mm symmetric enclosure for direct liquid cooling. Its incompatibility warning does not cover every E1.S variant. [2]

The OCP Datacenter NVMe SSD Specification v2.5 calls for at least Gen4 x4, activity/error LEDs, case temperature at most 80 degrees Celsius, and thermal/pressure-drop data for 9.5/15/25 mm variants. Its x4 devices use 1C. These requirements apply to that profile, not to every E1.S device. [3]

The 1C/x4 and 2C/x8 connector options do not establish the link actually supported by host and device. E1.S packaging also accommodates CXL memory devices. [2] [4] [5]

Relations

related
EDSFF, NVMe, Enterprise SSD, U.2, M.2, PCIe 4.0 storage, E1.L, E3.S, CXL memory expansion

Limitations

  • Symmetric enclosures built to Rev 1.6 or older are not compatible with Rev 2.0. [2]
  • The form-factor name does not determine product capacity, protocol support or application performance; check the actual device and host specifications. [4] [5]

Citations

  1. SFF-TA-1006 Enterprise and Datacenter 1U Short Device Form Factor (E1.S), Rev 2.0 (SNIA SFF TWG) (accessed 2026-10-16)
  2. Datacenter NVMe SSD Specification, Version 2.5, section 10.5 (Open Compute Project) (accessed 2026-10-16)
  3. SNIA SFF-TA-1002 Rev 1.6a: protocol-agnostic connector scope (accessed 2026-11-01)
  4. SNIA SSD Form Factors: EDSFF and CXL (accessed 2026-11-01)

Further reading

  1. Enterprise and Data Center SSD Form Factor (accessed 2026-03-26)
Sources & caveats
  • SFF-TA-1006 comes from the storage industry association small-form-factor group, a consortium of device and host makers.
  • The datacenter NVMe SSD specification is one buyer group requirements document, written by hyperscale operators and server makers, not a universal profile.
  • No capacity, price or adoption figures are given.
  • Arithmetic: 6.6 A x 12 V = 79.2 W.
  • 2026-11-01: reconciled the prior EDSFF contribution with later corpus detail; separated variant dimensions, connector options and device behavior. No hardware qualification was performed.

JSON: /data/terms/e1-s.json

Published by Hesela team · Updated

Report a correction · Editorial standards · Reuse guidance

Cite this page
Hesela team. E1.S. Hesela. 2026-11-01. https://hesela.dev/terms/e1-s/